Rustoleum Floor Paint 5Ltr

RustOleum Floor Coating Paint 5Ltr

7100/7100 NS is an easy to apply solvent based Alkyd floor coating specially designed for applying on old (>2 years), dry concrete for interior and exterior use. The coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistance during short contact periods against lubricating oils, fuel, petrol etc. 7100 Floor Coating is available in two versions, standard and anti slip NS (with a special synthetic anti slip additive).

Recommended Uses:

• 7100 Floor Coating can be applied on concrete floors older than 2 years, which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a damp repellent additive, which will prevent a good adhesion.
• 7100 Floor Coating can also be applied on old good adhering coatings.
• 7100 can be applied onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.

Specifications:

• Size: 750 ml
• Appearance: Gloss (60°: ± 90%)
• Colours: English Red, Moss Green, Light Grey
• Density: 1,0 -1,1 kg/l (depending on colour)
• Solids Content: 36 - 40 volume % (depending on colour)
• Viscosity: 75 - 80 Krebs Stormer units (7100NS: 85 - 90)
• Recommended film thickness: 50 ìm dry, equal to 130 ìm wet
• VOC-content: 456 g/l max.
• Ready-to-use mixture: 485 g/l max.
• Category: A/i
• EU Limit values: 600 g/l (2007) / 500 g/l (2010)

Drying times: 20°C/50% r.h.

• To touch: 6 hours
• To recoat: 24 hours
• Full hardness: 1 week

Coverage:

• Theoretical: 8,0 m²/l at 50 ìm dry
• Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.